Knowledge base·5 min read·2026-10-08

Why Is My Internet Slow in the Evening? How to Find the Cause

Fast by day, slow at night? Find out if it’s provider congestion, neighbours’ Wi-Fi or bufferbloat, how to measure it and what to tell your ISP.

During the day everything works fine, but around eight in the evening the trouble starts: shows keep buffering, your game lags and a video call with family keeps dropping. Sound familiar? You’re not alone. There are a few typical causes of internet that slows down in the evening, and the good news is that a few smart measurements can tell you fairly precisely which one it is. That’s also exactly what you need if you want your provider to take action.

Why the evening?

Internet use peaks roughly between 7 pm and 11 pm. Everyone is home, streaming, gaming, downloading and calling. That puts pressure on three places: your provider’s network, the Wi-Fi environment in your street or building, and your own home network.

1. Congestion at your provider

On virtually every connection, capacity is shared somewhere. With cable internet, homes in a neighbourhood share the capacity of a network segment. With fibre, a group of homes shares a fibre, and with mobile home internet you share a mast with every mobile user nearby. Further upstream, everyone shares the links to other networks. If any of those links is too tightly provisioned, you notice it at peak times as lower speeds, higher ping and sometimes packet loss.

Sometimes the congestion isn’t within your provider’s own network but on the route to a specific service. In that case only one streaming service or one game is slow, for example, while everything else works normally.

2. Wi-Fi interference from neighbours

In the evening your neighbours are using their Wi-Fi heavily too. On the 2.4 GHz band, and in a block of flats on 5 GHz as well, you’re competing with dozens of networks for airtime. Your router has to wait more often and resend packets. The result is lower speed and, above all, fluctuating ping and jitter. This problem only exists over Wi-Fi; on a cable you won’t notice it.

3. Bufferbloat in your own home

Your own network is busier in the evening too. One person streams in 4K, another downloads a game update, a phone runs a backup. As soon as your connection is full, queues in your router or modem can grow enormously. Your ping jumps from 10 to 200 ms or more and everything feels slow, even if your plan is fast enough. That’s called bufferbloat. You’ll find more in what is bufferbloat.

How to diagnose it

To find the cause, compare measurements in a smart way. The goal is to change one factor at a time.

Step 1: test wired and over Wi-Fi

Connect a laptop to your router with an Ethernet cable and run a speed test. Immediately afterwards, run a test over Wi-Fi on the same laptop. If the evening problem only shows up over Wi-Fi, it’s probably interference from neighbours or your Wi-Fi settings. If it’s also poor on the cable, the problem lies with your connection, your provider or bufferbloat.

Step 2: test at different times

Measure over the cable at a quiet time, such as morning or midday, and at the busy time in the evening. Do this for a few days in a row and write down the results: date, time, download, upload, ping, jitter and packet loss. If wired speed drops consistently in the evening while nobody else at home is active, that strongly points to congestion at your provider.

Step 3: rule out your own usage

Make sure nobody else in the house is using a lot of bandwidth during your test, or temporarily switch other devices off. That way you know you’re measuring the line and not your housemate’s Netflix stream. If you specifically want to know whether bufferbloat is the problem, look at the bufferbloat score in your PulseSpeed result: it shows how much your ping rises when the connection is fully loaded.

Step 4: measure for longer

Short tests miss brief drop-outs. So run the stability test in the evening. It measures ping, jitter and packet loss for five minutes and reveals spikes and interruptions that a speed test lasting a few seconds won’t catch. If you make lots of calls, try the video call test too.

What can you do yourself?

  • Wi-Fi interference: use 5 GHz or, if your router and devices support it, 6 GHz. Pick a quieter channel, use a narrower channel width on 2.4 GHz and connect stationary devices by cable. More tips in how to make Wi-Fi faster.
  • Bufferbloat: enable Smart Queue Management (SQM, with fq_codel or CAKE) if your router supports it, or set QoS to around 85 to 95 per cent of your measured line speed. You give up a little peak speed but keep latency low when things get busy.
  • Schedule big downloads: let game updates and backups run overnight.
  • Equipment: restart modem and router, check cables and ask your provider whether your modem is still up to date.

What to tell your provider

A complaint like “my internet is slow in the evening” often ends with advice to restart your modem. So come with evidence. Include:

  1. That you tested wired, with a laptop plugged directly into the router or modem, and with no other usage in the house.
  2. An overview of measurements over several days, daytime and evening, with date, time, download, upload, ping, jitter and packet loss.
  3. The pattern: for example “around 900 Mbps and 8 ms during the day; between 9 pm and 11 pm, 150 Mbps, 40 ms ping and 2% packet loss”.
  4. Stability test results if you see interruptions or spikes.
  5. What you’ve already tried: modem restarted, cables replaced, other devices switched off.

Ask specifically whether there are capacity problems in your area or on your network segment, and whether your line can be checked remotely for signal issues. A well-documented report like this gets taken seriously faster and passed on to a technical team.

Checklist

  • Test wired and over Wi-Fi to rule out Wi-Fi interference.
  • Measure wired at quiet and busy times over a few days.
  • Make sure there’s no other traffic in the house during the test.
  • Check bufferbloat and enable SQM or QoS if it’s high.
  • Use the stability test for drop-outs and spikes.
  • Report persistent evening problems to your provider, with measurements as evidence.

Measure it yourself

Speed test with bufferbloat, jitter and AI explanation. Free and ad-free.

Start the speed test →
← Back to knowledge base