# How to Make Your Wi-Fi Faster: 12 Tips Ranked by Impact

Fast plan but slow Wi-Fi? These 12 practical tips, ranked by impact, help you get more speed and stability out of your home network without guesswork.

You pay for a fast connection, yet on the sofa or in the attic everything feels sluggish. More often than not, the problem isn’t your provider but your Wi-Fi. The good news is that a few targeted changes often deliver more real-world speed than upgrading to a pricier plan. Below are twelve tips, ordered from biggest to smallest impact. Start at the top and measure after each change to see what actually helps.

## Measure first: is it your Wi-Fi or your connection?

Before you start moving equipment around, find out where the bottleneck is. Connect a laptop to your router with an Ethernet cable and run a speed test. Then repeat the test over Wi-Fi, first right next to the router and then in the room where you have problems. If the wired result is also poor, the issue lies with your line or provider and the tips below will only help so much. If wired speed is fine and only Wi-Fi drops off, read on.

## The 12 tips

### 1. Put your router in a better spot

This is the cheapest and often most effective improvement. Wi-Fi signals weaken considerably through walls, floors, metal and water (including underfloor heating, fish tanks and mirrors). Place the router as centrally as possible, at eye level or higher, and not in a utility cupboard, behind the TV or inside a cabinet. If your fibre or cable connection enters the house in a corner, running a longer Ethernet cable to a central spot is usually worth it.

### 2. Use a cable wherever you can

Anything that doesn’t move, such as a TV, games console, desktop PC or NAS, is best connected by cable. That gives those devices full speed and the lowest latency, and it frees up Wi-Fi for devices that genuinely need to be mobile. Every device you take off Wi-Fi leaves more airtime for the rest.

### 3. Use 5 GHz (and 6 GHz if you have it)

The 2.4 GHz band has good range but is crowded, slow and prone to interference from neighbours, Bluetooth and microwaves. The 5 GHz band offers far more capacity and less interference, although its range is shorter. If your router and devices support Wi-Fi 6E or Wi-Fi 7, the 6 GHz band is quieter still. Let phones and laptops connect on 5 or 6 GHz and keep 2.4 GHz for smart-home gadgets that can’t do anything else.

### 4. Extend your network with mesh or an access point

In a larger home, or one with concrete floors, a single router simply can’t cover every room. A mesh system or an extra access point fixes this properly, especially if the units are connected to each other by cable. Our guide to mesh vs repeater vs access point explains which option suits your situation.

### 5. Pick a quieter channel

In a terraced house or flat you can easily see dozens of neighbouring networks. On 2.4 GHz the channels overlap, so stick to 1, 6 or 11. On 5 GHz there are many more channels, including so-called DFS channels that are often less busy. Most routers pick a channel automatically, but they don’t always choose well. A Wi-Fi analyser app on your phone shows which channels are most crowded where you live.

### 6. Set a sensible channel width

Wider channels mean more speed but also more exposure to interference. On 2.4 GHz, 20 MHz is almost always the right choice; 40 MHz mostly causes trouble in busy areas. On 5 GHz, 80 MHz is usually a good balance. 160 MHz looks faster on paper but only works well if few neighbours share the same frequencies.

### 7. Update your router’s firmware

Firmware updates don’t just close security holes; they also fix bugs that affect performance and stability. Check your router’s admin page or app to see whether automatic updates are enabled. A router that hasn’t received an update in years is a good reason to replace it.

### 8. Replace an outdated router

A router that is five or more years old often supports only Wi-Fi 5 or older and has a weaker processor, which shows when many devices are active at once. A Wi-Fi 6 or newer router handles lots of simultaneous connections more efficiently thanks to techniques such as OFDMA. See Wi-Fi 6, 6E and 7 explained for details.

### 9. Watch out for old and slow devices

Wi-Fi is a shared medium: devices take turns to transmit. An old device that talks slowly, or one with a weak signal, uses a disproportionate amount of airtime. Disable legacy compatibility modes (such as 802.11b) if your router allows it, and give distant devices a better link via cable or an extra access point.

### 10. Use one network name, or deliberately two

With band steering, your router nudges devices onto the best band under a single network name. That usually works well. If your devices stubbornly cling to 2.4 GHz, temporarily create a separate network name for 5 GHz so you decide where your laptop connects.

### 11. Tackle bufferbloat

If your internet feels slow as soon as someone else starts a big download or a cloud backup, you may be suffering from bufferbloat: latency shoots up when the line is full. The fix is Smart Queue Management (SQM, for example fq_codel or CAKE) or QoS set slightly below your actual line speed. Read more in what is bufferbloat. PulseSpeed measures bufferbloat automatically with every test.

### 12. Restart and tidy up

A restart won’t fix structural problems, but it can temporarily revive a router that has hung or overheated. If you need to do it every week, something is wrong with the hardware or firmware. Also remove old, unused devices from your network and make sure the router has room to shed its heat.

## What not to bother with

Some popular advice doesn’t do much. A cheap plug-in repeater in the socket next to the router adds nothing. Twisting a router’s antennas in every direction makes a small difference at best. And a faster plan won’t help if the bottleneck is your Wi-Fi: you’d be paying for speed your devices never reach.

## Measure the result

After each change, run a new test in the same spot so you can see what works. Look beyond download speed to ping, jitter and bufferbloat, as those determine how smooth video calls and gaming feel. If you’re unsure about stability, run the five-minute stability test. It reveals occasional drop-outs or latency spikes that a short test can miss.

## Checklist

- Test both wired and over Wi-Fi to find the bottleneck.

- Place the router centrally, high up and in the open.

- Connect stationary devices with Ethernet.

- Use 5 or 6 GHz for phones and laptops.

- Large home? Choose mesh or access points, ideally with wired backhaul.

- Choose a quiet channel and a sensible channel width.

- Keep firmware up to date and replace routers that no longer get updates.

- Lag when the line is busy? Enable SQM or QoS.

- Measure again after every step.

### Measure it yourself

Speed test with bufferbloat, jitter and AI explanation. Free and ad-free.
